中国福彩网

今天是: The company specializes in the production of various flue gas desulfurization towers and desulfurization precipitators. The products have high desulfurization efficiency and are widely used. Today is: Welcome to Longkang FRP desulfurization tower manufacturer!
FRP desulfurization tower series
PRODUCT

Matters needing attention in the process of using boiler desulfurization tower and what to do when vortex is formed inside

Add time: 2019-01-20 17:30 Already Personal visits and consultations

在使用过程中应注意什么,在塔内形成涡流时应注意什么为了保证脱硫塔的工作效率,脱硫塔的操作人员在脱硫操作过程中不需要使用脱硫塔的设备,而需要对脱硫塔的设备进行正确的检修和维护。 What should be paid attention to during the use of the boiler desulfurization tower , and what should be paid attention to when forming vortex in the tower. In order to ensure the efficiency of the desulfurization tower, the operators of the desulfurization tower do not need to use the desulfurization tower equipment during the desulfurization operation. Tower equipment is properly overhauled and maintained. Desulfurization tower time.
Therefore, it is very important to properly use the desulfurization tower and to detect and maintain the desulfurization tower. Only in this way can our desulfurization tower equipment extend its service life and operation time.
Matters needing attention in the use of desulfurization tower and measures to be taken when vortex is formed in the tower
Five problems should be noticed in the use of desulfurization tower
In order to ensure the working efficiency of the desulfurization tower, the operators of the desulfurization tower do not need to use the equipment of the desulfurization tower during the desulfurization operation, but need to perform correct maintenance and maintenance on the equipment of the desulfurization tower. Desulfurization tower time.
Therefore, it is very important to properly use the desulfurization tower and to detect and maintain the desulfurization tower. Only in this way can our desulfurization tower equipment extend its service life and operation time.
1. When the desulfurization tower is operating, the internal air flow will form a vortex. Once a vortex is formed, it is almost impossible to eliminate it. Especially when the temperature and speed of dust gas changes and the tube wall condenses, the dust removal pipe must be cleaned regularly.
2. Bolt or other fastening devices shall be used between the cleaning hole cover and the wall of the desulfurization tower. A rubber plate or rubber band should be used as a gasket between the cover plate and the dust collector.
three. The sweeping position of the desulfurization tower should be selected at the side or upper part of the pipeline. All swept holes must be closed.
4. Difficult operation and management, water level is not easy to control, low water level can not achieve the effect of dust removal, induced draft fan water is high, acid and alkali neutralization, easy to control.
5. Since each desulfurization tower consumes a large amount of steel, the better way to install the desulfurization tower is to gradually reduce the material from the upper part of the cylinder to the thickness. This is a better way to maintain the desulfurization tower.
Operation and maintenance of desulfurization tower equipment are also essential. The normal operation of the desulfurization tower equipment is indispensable for the daily careful maintenance work of the staff and the regular cleaning of the desulfurization tower.
The sweeping position of the desulfurization tower should be selected at the side or upper part of the pipeline. All sweep holes must be sealed and free of air leaks. If air leakage occurs, the flow velocity in the pipe upstream of the sweep hole will decrease, and dust deposition will be more serious, resulting in a decrease in the suction capacity of the suction hole. Pay attention to these details. The details determine success or failure. Small screws can cause major accidents. Don't omit some minor problems.
2. What to do when a vortex is formed in the desulfurization tower
When the desulfurization tower is running, there are some minor problems with the equipment. The problem is not serious, as long as we resolve it immediately. Don't delay our future operations.
In fact, because the desulfurization tower and other equipment will encounter some large and small problems during long-term operation, it is not only the equipment of the desulfurization tower, but also the daily inspection and maintenance of any equipment in operation.
If something goes wrong, we must repair it in time. One of the common problems in the use of desulfurization tower equipment is the issue that Kehan Environmental Protection Agency will discuss today.
Q: What should I do when using swirling flow in the desulfurization tower?
Answer: The dust collection source point of the desulfurization tower constitutes a system with simple pipelines, convenient equipment layout and superior local conditions. The dust collection source point in the production section should constitute a system capable of space operation. When no pollution occurs, the system can be stopped to achieve the purpose of energy saving. At the same time, the nature of the dust is single, which is conducive to the recovery and utilization of dust.
The desulfurization tower and fan are scattered near the dust source or the workshop, and production operators can operate at the same time. Centralized dust removal system: When there are many dust sources, large extraction volumes, and relatively dispersed dust sources, many dust sources will be concentrated into a large dust removal system.
It is also necessary to add oil and grease on time to maintain good lubrication of the moving parts of the dust removal equipment. In order to ensure that the equipment is in a good lubrication state and prevent premature damage due to poor lubrication, all lubrication components must be given or replaced in a timely and quantitative manner. Once eddy currents are formed, it is almost impossible to eliminate them. Especially when the temperature and speed of the dust gas changes and condensation may form on the pipe wall, dust deposits will be generated in the dust collector.
布袋的安装应检查是否有孔、破损等缺陷。 The installation of boiler desulfurization tower bags shall be inspected for defects such as holes and damage. Installation should be slow to prevent the bag from coming into contact with the surrounding hard and sharp objects. It is strictly forbidden to step on or press it to prevent damage, and it is forbidden to fix it with special fixtures. It is strictly prohibited to install desulfurization and dust removal bags for fireworks. After installation, certain measures should be taken to prevent fire accidents.

Previous post: Do you really understand the working principle of brick plant desulfurization tower equipment?
Next: Efficient workability of brick plant desulfurization tower and its effect on the environment

Overview of Longkang Desulfurization Tower Series Desulfurization Tower Information Technology Support Project Case Honor Contact Sitemap XML Map
Hebei Longkang FRP Co., Ltd. Record No .: Ji ICP No. 12016266-13
Contact: Manager Zhou Mobile: 15631879106 Address: No. 356, Yuhua East Street, Zaoqiang County, Hebei Province Specializing in the production of FRP desulfurization tower