FRP desulfurization tower series
What needs to be done for FRP desulfurization tower anticorrosion?
Add time: 2019-02-22 09:48 Already Personal visits and consultations
的腐蚀玻璃钢脱硫塔的防腐工作非常重要。 How to prevent corrosion of FRP desulfurization tower The anticorrosive work of FRP desulfurization tower is very important. In order to let you understand the related performance of Anqiu Runtong Glass Fiber Reinforced Plastic Co., Ltd. more clearly, let Xiaobian fully introduce the anticorrosive work of this product. Understanding preservative work can greatly help extend product life. Let us look at the details below.
1. Protect the goods during installation and transportation, and do not damage the body and components.
2. When leaving the factory, it should be packed and transported in stages according to specific conditions, and commissioned by on-site personnel.
three. Be careful when using. Start the pump for 2 to 3 minutes before starting the fan. Stop the fan for 1 to 2 minutes before stopping the pump.
4. Clean irrelevant disc sprinklers and packings and maintain as planned.
5. When used outdoors in summer, the bottom tank of the desulfurization tower should be antifreeze treated.
6. The glass fiber reinforced plastic desulfurization tower bottom tank has a liquid level mark. Pay attention to replenishing the absorption liquid during use. Before use, the absorbent must be filled according to the liquid level.
7. When the user is in the equipment, the pumps and fans should be on a concrete base as needed.
8. The acidity of the liquid in the tank at the bottom of the tower and the purification level of the exhaust gas should be checked regularly.
The glass fiber reinforced plastic desulfurization tower is composed of impurities such as ore dust, arsenic, fluorine, and sulfur dioxide at the bottom of the tower. After contacting the glass fiber reinforced plastic absorption tower, the impurities are removed and the gas is purified. It is well known that glass fiber reinforced plastic absorption tower mainly puts liquid or gas into the packed bed in the opposite direction. The gas passes through the distribution plate and is evenly distributed in the spherical lace ring. Each of them is in direct contact. The filler is used to increase the contact area, remove the harmful gases absorbed by the particles in the gas and liquid, and is widely used in the purification of acid waste gas and the treatment of toxic and harmful gases. The glass fiber reinforced plastic absorption tower is divided into vertical and horizontal. Chimneys are more widely used. He is in the north and south of China. So why
1. In places where insulation is needed in winter or in the north, FRP chimneys do not need a thermal insulation layer or insulation layer to achieve good thermal insulation effects, which is determined by the slow heat transfer characteristics of FRP materials.
2. We can produce more corrosion-resistant products according to customer requirements.
three. The cost and ex-factory price of FRP chimneys are lower than other chimneys.
4. FRP grids have a long service life, so FRP chimneys made of high-quality FRP have a longer service life.
5. Because the proportion of FRP desulfurization tower is small and it is easier to transport than other metal products, the amount of steel used to support FRP is more economical and the cost of integrated installation is lower.
- What are the methods to solve the high pressure difference of FRP desulfurization tower2019-03-16
- The design of FRP desulfurization tower must meet two basic requirements? 2019-03-11
- Introduction of Double Alkali Desulfurization Process for FRP Desulfurization Tower2019-03-08
- Revealed glass fiber reinforced plastic desulfurization tower to better promote the harmonious development of the environment and society2019-03-01