FRP desulfurization tower series
What are the technological advancements of brick plant desulfurization towers?
Add time: 2019-03-13 10:13 Already Personal visits and consultations
的技术进步是什么砖厂脱硫塔主要用于化工行业的脱硫，因此在施工中，严格按照要求施工。 What is the technical progress of the brick plant desulfurization tower? The brick plant desulfurization tower is mainly used for desulfurization in the chemical industry. Therefore, during construction, construction is strictly performed in accordance with requirements. After the brick plant desulfurization tower is completed, the main functions can be explained from six aspects. Here, we give you a brief summary:
1. There is no wastewater discharge during the absorption process of the desulfurization tower of the brick factory under normal operating conditions.
2. The operation of the desulfurization tower of the brick factory is simple, the system runs stably, and the operation time is long.
three. Reliable precipitation separation can greatly reduce the investment in the tank.
4. The desulfurization slag of the brick plant desulfurization tower is non-toxic, soluble, and free from secondary pollution, and can be comprehensively utilized.
5. Lime neutralization and precipitation, sodium and alkali recovery, less loss and low operating cost;
6. Double alkali desulfurization. Brick plant desulfurization tower uses sodium alkali as absorbent. High reactivity and fast absorption. Reducing the liquid-to-gas ratio not only reduces operating costs, but also reduces investment in pools, pumps and piping.
What is the technological progress of the desulfurization tower of the brick factory
1. The brick factory desulfurization tower adopts PLC automatic control system, which is convenient and quick to operate and reduces the workload.
2. Using swirl technology, jet technology, pressure atomization technology and impact device technology, the flue gas and the desulfurization liquid are fully contacted to achieve the ideal desulfurization effect.
three. The desulfurization solution is circulated and connected to a pH monitoring system to ensure that the pH value of the desulfurization solution is controlled at about 11. The method of adding medicine before the pump is adopted.
4. Brick plant desulfurization tower uses advanced liquid-gas separator and liquid film adsorption liquid-gas separation principle. It can separate small droplets in the flue gas, reduce the water consumption of the system, and save operating costs.
5. There are no moving parts in the tower, and the overall construction in the tower reduces the air leakage rate and effectively reduces the maintenance probability.
6. The desulfurization tower body of the brick factory is made of glass fiber reinforced plastic, which effectively prevents acid gas corrosion, has sufficient wear resistance, prolongs the service life of the equipment, and has a short production cycle of the equipment, which can be installed on site. Construction time is greatly reduced.
7. The use of the front-end fan of the desulfurization tower of the brick factory avoids the problem of water inflow into the fan and prolongs the service life of the fan.
- What kind of anti-corrosion material is good for anti-corrosion tower of brick factory and the results of anti-corrosion construction2019-03-18
- Brick plant desulfurization tower market prospects are getting wider and wider! 2019-03-06
- Brick plant desulfurization tower design must meet two basic requirements? 2019-02-26
- Brick plant desulfurization tower is pursuing higher development needs? 2019-02-23